Offset digital printing with heat transfer has surprised and enthralled many industry experts who have been in the printing business for many years. Therefore, many in the printing industry are now seeking advice, and now the market is growing. In the following three sections, I’ll discuss the reasons why the best DTF printer of the Sublistar Brand is growing popular.
The flow of the process has been greatly simplified. The second reason is that static electricity was a major issue during printing for many years. Additionally, the six-segment baking system can truly achieve quick-beating and fast-release as well as rapid collection.
1. The process’s progress
Traditional heat transfer is the process of printing the final image first after which the film is laminated by using a laminating device. It is possible to use an engraving machine to create a hollowed-out design. Laser engraving could be necessary when the pattern is intricate. The film will have to be cut off and then pressed.
Sublistar’s best DTF printer is much easier to utilize. Utilize PS to make changes to your image. You can print directly using the software. This is a single-stop procedure that can be done by only one person.
best DTF printer is comfortable and skin-friendly. Traditional heat transfer has a cold and hard texture that is not air-breathable. It’s very hard to get. The finished product, printed using the best DTF printer will be more pleasant in terms of comfort.
Traditional heat transfer does not stick well it will break and crack after repeated washings. It can look like a glue. Offset heat transfers printed by Sublistar are not prone to stretching or washing, and its fastness to wet and dry rubbing can reach the level of 4. It will not crack and have an offset feeling after washing hundreds of times.
One-click hollow printing design, no PS, and no cutting plotter or engraving machine, which simplifies the process of heat transfer but enhances the quality of the heat transfer. It can print 8-12 squares in an hour, and approximately 200 T-shirts can be printed. Some clothing industry colleagues as well as some of their customers have shown keen enthusiasm for it.
This printer uses heat transfer technology. It is equipped with two 4720 nozzles that are white, one color, and the white color outputs simultaneously. Printing accuracy is superb and the color is spectacular It is also very efficient in reducing the amount of print and there’s virtually no difference in color. The printer has an automated cleaning system and ink circuit circulation system, which can safeguard the printhead while reducing the loss of print heads.
2. How to effectively solve the issue of static electricity?
best DTF printer is the combination of a temperature transfer printer and a shaker for powder. The printer that prints heat can be fed directly into the powder shaker after it has been hollowed. The heat transfer product is ready for use after the powder is dried and heated. These designs can be cut and pressed directly on the garment.
Many clients are concerned about a potential issue when they talk to a consultant, that is, what do I do if there’s static electricity during printing? Let’s talk about the best way to solve this problem.
We can use antistatic tape, static remover, as well as other products.
Also, look into the principal reasons for the static electricity produced by your printer. friction, contact, and the separation of objects, too dry air. Additionally, other elements can cause static electricity. When it comes to the environment in which printing takes place, the dryer the air gets and the more electrostatic charge will be generated. This will affect the operation of the printer.
Additionally, keeping the indoor air moist is one of the most effective strategies. Alcohol can be used to cleanse and dry the squeegee, which is used to feed the paper.
For this reason, the best DTF printer has taken this into account when designing it, so an electrostatic rod was designed to be installed in the rear unwinding system. The effect of static electricity is greatly reduced which is why you can purchase the machine with confidence.
3.6-stage baking system
Sublistar’s best DTF printer is very well-known and the 6-stage baking is among the most sought-after. Digital printers also require drying their items. Because there is no system for drying, traditional silk screen heat transfers have to be exposed. This takes a lot of time.
Sublistar’s DTF printer features a six-stage baking process that permits fast printing and rewinding.
The printer comes with a front middle, and back three-stage drying. On the left part of the printer, there’s a temperature display as well as a switch specifically designed for temperature control. The drying system is located underneath the mold platform which supports the printing consumables and is warm to the touch. The pattern can be dried before printing.
In the second step, the pattern created by the printer is sent to the shaker to be pre-heated. The machine will spread and shake the powder. Additionally, there is a heating system to help the hot melting powder adhere more effectively to the ink layer.
The conveyor belt is used to warm the melting powder to allow it to increase the washability of the pattern. The conductive belt moves through the pattern over 2 to 3 minutes. The heating and baking process will be more uniform with the conductive conveyor belt. The guide belt can then be used to deliver the heat transfer product, which is then press-pressed and ironed. It can also be used to roll it for storage.
Do you have a better understanding of the best DTF printer that we provide? Are you interested in our equipment? Do you need us to improve some of our features?
Digital Printing Technology 